AN120071 – Boral Resources (NSW) Pty Limited Sydney Metropolitan Concrete Contract Determination
9.1 Size
(a) The customer's requirements or technical requirements will determine the actual load size however Boral and the Operator are jointly committed to ensuring that the legal carrying capacity of the vehicle and the rated capacity of the mixer are not exceeded.
(b) You shall be loaded to the maximum legal carrying capacity wherever possible, except in the case of a single load or message, or where a subsequent load would result in less than three (3) cubic metres being carried.
9.2 Daily Loading Procedure
The daily loading procedure is:
(a) The initial daily starting order will be in accordance with a "cyclic roster". (The cycle is that the first truck on one day goes to the end of the roster the next day; the second truck on that one day becomes first truck on the next day and so on.)
(b) All vehicles will then be loaded in order of their return to the plant. The exceptions to the above are: (i) mini mix loads (less than 3.0m3);
(ii) single load or message greater than the mixer capacity or legal carrying capacity of the truck next in line
(iii) trucks with returned concrete where it is impractical due to facility or time constraint to transfer the returned concrete to the next truck in line.
(c) Boral's employee driven vehicles and Short Term Operators shall not be preferentially loaded.
(d) Boral's employee driven vehicles shall participate in the cyclic roster as defined under Clause 9.2(a).
(e) The initial loading time and the initial plant from which such loading is to occur shall be notified by Boral to you before the close of business on the previous day.
