AN120071 – Boral Resources (NSW) Pty Limited Sydney Metropolitan Concrete Contract Determination
Where you own the mixer the following shall apply:
16A.1 Your mixer is in your care and you shall keep the unit clean and tidy. The Consultative Committee will monitor the presentation and image of vehicles to ensure that the appropriate standard is maintained.
16A.2 All cleaning materials and equipment necessary for cleaning the vehicle shall be supplied by Boral and shall comply with any and all statutory requirements and regulations.
16A.3
(a) You shall be responsible for the removal of hardened concrete build-up from the inside of the agitator, a process commonly known as de-dagging.
(b) All de-dagging shall be carried out strictly in accordance with the agreed procedure and in compliance with relevant Occupational Health and Safety regulations. (Boral's procedure to be ratified) approved by WorkCover Authority.
(c) The limit of your responsibility in order that the de-dagging may take place shall be limited to the provision of your labour only. All equipment is to be provided by Boral at no cost to you.
(d) All de-dagging work will be conducted outside normal working hours or otherwise by mutual agreement between you and Boral.
(e) Boral and you will ensure that the correct de-dagging procedures are followed.
16A.4 Your Vehicle is to be parked only in places approved by Boral.
16A.5 You shall be responsible for any damage to the mixer except where such damage is caused by Boral, its servants or agents.
