AN170010 – Building and Construction Industry Award
(a) Each carpenter shall provide him/herself with and maintain a lock-up tool box, a hammer, nail packet, pencil, comb square, hand drill and bits up to 6 mm (1/4"), brace and bits 6 mm (1/4") up to 25 mm (1"), brace lock bits, set of chisels 6 mm (1/4"), 9 mm (3/8"), 12 mm (1/2"), 18 mm (3/4"), 25 mm (1"), 37 mm (1 1/2"), plugging chisel, panel saw, hand saw, coping saw, keyhole saw - with extra nail cutting blade, chalk-line and chalk 30 m (100') line, level (about 750 mm (30")), jack and smooth planes, German jack, hatchet, rasp, three screwdrivers 250 mm (10"), 200 mm (8"), and 150 mm (6"), plumb bob, dividers, oilstone, punches, pinch bar, sand-paper cork, bevel, tin snips, pincers, single tooth marking gauge, hacksaw frame, cold chisels - one small, pad saw handle, files, one rule 900 mm (3'), line level, roofing square.
(b) Each joiner shall provide him/herself with and maintain a lock-up tool box, a hammer, rule, pencil, 300 mm (12") and 150 mm (6") squares, mitre set, hand drill and bits up to 6 mm (1/4"), brace and bits from 6 mm (1/4") to 25 mm (1"), set of chisels 6 mm (1/4") to 37 mm (1 1/2") with extra 6 mm (1/4") and 9 mm (3/8") mortise chisels, dovetail saw, tenon saw, panel saw and hand saw, coping or bowsaw, jack and smooth plane, rebate plane, rasps and files, papering cork, scraper, mallet, small level 600 mm (24"), 9 mm (3/8") gauge, dividers, routers, oilstones, punches gauges - single tooth-mortise, bevel screwdrivers 150 mm (6"), 200 mm (8"), 250 mm (10") spokeshave, pincers, scriber, bradawl.
(c) Each plasterer shall provide him/herself with and maintain:
(i) Solid plasterer: Lockup tool box, hawk, wooden floats - one large 300 mm (12") x 110 mm (4 1/2") x 18 mm (3/4) thick (max.), one fining 150 mm (6") x 100 mm (4") x 18 mm (3/4") thick, 1 angle 350 mm (14") x 62 mm (2 1/2") x 18 mm (3/4") thick, 6 various small floats, one steel light-weight setting trowel, one floating trowel, one gauging trowel, one splashing trowel, small tool brush, small tool, claw hammer, hatchet, cold chisel, spirit level (approx. 900 mm (3'), plumb bob, steel squares, 300 mm (12") x 200 mm (8"), 225 mm (9") x 150 mm (6"), 900 mm (3') rule, tin snips, chalk-line, setting brush 150 mm (6"), grass floating brush, joint rule, brick buster.
(ii) Metal studs and suspended ceiling kit: Lockup tool box, file, square, keyhole saw, screwdriver 200 mm (8"), two 9 mm (3/8") open-end spanners, plus tools as under fibrous plaster and drywall tool kit.
(iii) Fibrous plaster and drywall tool kit: Lockup tool box, pencil, hawk, small tool, trowel, angle trowel, hammer, hatchet, wood chisel, spirit level, plump bob, tin snips, chalk-line, stopping brush 150 mm (6"), small tool brush, sanding float, stanley knife, wood saw, cornice saw, plaster sheet saw, hacksaw, nail punch, broad knife 75 mm (3"), pliers, nail bag, broad knife 25 mm (1"), 900 mm (3') rule, joint rule 200 mm (8"), joint rule 100 mm (4").
(d) Each bricklayer shall provide him/herself with and maintain a lockup tool box, brick trowel, pointing trowel, spirit level 750 mm (30"), club hammer, one plumb rule 1500 mm (60"), brick hammer, brick bolster, scutch hammer, line and pins, tingle plate, 900 mm (3') rule and pencil, bannister broom 9 mm (3/8") single jointer, 9 mm (3/8") double jointer, one cold chisel.
(e) Each ceramic tiler shall provide him/herself with and maintain a lockup tool box, pincersbeak, round and side cutters, nippers rub-stone, picking hammer, screwdrivers, scribe cutter, pointing trowel, gauging trowel, 3.6 m (12') tape, scutch hammer.
(f) Each roof tiler shall provide him/herself with and maintain a lockup tool box, a pair of pincers for cutting tiles, pair of tin snips, hammer and nail pocket, hatchet, line, tape, hide aprons, scutch hammer, chalk-line, rule, pencil, trowel beading, trowel pointing, saw, broom (cleaning down), bucket cutting knife (sarking), block iron, tile cutting machine.
(g) Each signwriter shall provide him/herself with and maintain a lockup tool box, mahl-stick, rule, compass, dividers, straight edge, chalk-line, rule or steel tape not exceeding 3.6 m (12'), sable and other writers' pencils, pencils, tracing wheel, chamois leather, silk screen stencil knife, gilding cushion, mot, knife tip and any 'T' square up to 750 mm (30"), dagger and sword liner, all brushes up to 37 mm (1 1/2") width.
(h) Each painter and decorator shall provide him/herself with and maintain a lock-up tool box, a lay-brush, scissors, rule, plumb bob, chalk- line, pencils, rule and/or steel tape not exceeding 3.6 m (12'), trimming knife (if he requires such an instrument) and also with surface and joint rollers in addition to those tools supplied as a painter.
(i) Each painter shall provide him/herself with and maintain a lockup tool box, and ordinary dusting brush and all necessary stripping and stopping knives, hammer, hacking knife, screwdriver and glazing knife, rule or steel tape not exceeding 3.6 m (12'). The employer shall provide all other brushes that may be necessary.
(j) Each glazier shall provide him/herself with and maintain a lockup tool box, 2 putty knives (one facing, one stripping), 12 mm (1/2") wood chisel, light claw hammer, pair of pincers, duster, nail punch, hacking knife, heavy claw hammer, 900 mm (3') folding rule, pair of 250 mm (10") snips, medium screwdriver, heavy punch, centre punch, prick punch, broad knife, marking line 18 m (60') and 3.6 m (12'), steel tape. The employer shall supply gas cutters to leadlight glaziers.
(k) The employer shall provide on each job, a secure weatherproof locker solely for the purpose of storing employees' tools.
